浙江发展会展旅游的战略构想

通过对浙江会展旅游现状的分析和研究,总结了浙江会展旅游业的现状与优势,指出了面临的问题,进而从政府与会展企业角度提出了发展浙江会展旅游业的对策.     

具有一对零态射的Morita Context环(II)

设$(A,B,V,W,\psi,\phi)$是一个Morita Context,具有一对零态射$\psi=0$, $\phi=0$, $C =\left ( \begin{array} {cc}A & V \\W & B \end{array}\right)$是对应的Morita Context环.本文给出了$C$与$A,B,V,W$之间关于环的$\pi$-正则性、semiclean性、Mophic性和环的Exchgange性、Potent性、GM性的关系.     

PINNING EFFECT OF LEAD LANTHANUM TITANATE THIN FILMS DEPOSITED ON DIFFERENT SUBSTRATES

Pinning effect of lead lanthanum titanate (PLT) ferroelectric thin films with excess PbO of 20 mol% has been studied for deposition on diffe rent substrates. Silicon, sapphire and quartz were used as substrates on which P t/Ti or LaNiO₃ thin films were deposited as bottom electrodes. Electron probe analysis results showed that there was still a certain amount of excess Pb in PLT films after annealing at 550 ℃ for 1 h, and the amount of it was dependent on the substrate used. The distribution of excess Pb in the films was investig ated by Auger electron spectroscopy depth profile. It was shown that the substrates and the bottom electrodes had significant effects on the content and distrib ution of excess Pb in PLT films. The excess Pb and its accumulation at the inter face between the film and bottom electrode may act as pinning centers and have a pinning effect on domains, which can be observed by abnormal P-E hysteresis loops and abnormal C-V curves. The excess Pb content in the films and the accumulation of Pb at the interface were high in PLT films deposited on Pt/Ti/S i, and considerable pinning effect was observed. As LaNiO₃ would absorb most part of the excess Pb in PLT films, the content of excess Pb in the films deposited on LaNiO₃/Si was very low and the pinning effect was hardly observed.     

管肋式辐射器排热特性的数值分析与优化设计

为得到按单面辐射方式布置的管肋式空间辐射器的排热特性，建立了相应的数学模型．采用数值模拟方法分析了管内流体温度、肋片几何尺寸和等效热沉温度对辐射器排热特性的影响，得到了不同参数值下辐射器单位面积排热量以及特定参数范围内的辐射器肋片最佳宽度和肋片效率．数值模拟结果对辐射器的工程结构设计以及空间站热管理方案的优化分析具有一定的参考价值．     

A Fully Vectorial Effective Index Method for Accurate Dispersion Calculation of Photonic Crystal Fibres

A fully vectorial effective index method is developed for accurate dispersion calculation of photonic crystal fibres （PCFs）. In order to improve the accuracy of the model, different values for the effective core radius are used when PCFs have different fibre parameters. The accuracy of our approach is demonstrated by comparing our results with other numerical and experimental results reported in literature. It is found that the accuracy of the fully vectorial effective index method is improved and our results agree well with accurate numerical results obtained by other methods as well as the previously reported experimental data.     

Design of Two-Dimensional Photonic Crystal Edge Emitting Laser for Photonic Integrated Circuits

An edge emitting laser based on two-dimensional photonic crystal slabs is proposed. The device consists of a square lattice microcavity, which is composed of two structures with the same period but different radius of air-holes, and a waveguide. In the cavity, laser resonance in the inner structure benefits from not only the anomalous dispersion characteristic of the first band-edge at the M point in the first Brillouin-zone but also zero photon states in the outer structure. A line defect waveguide is introduced in the outer structure for extracting photons from the inner cavity. Three-dimensional finite-difference time-domain simulations apparently show the in-plane laser output from the waveguide. The microcavity has an effective mode volume of about 3.2（λ/nslab）^3 for oscillation mode and the quality factor of the device including line defect waveguide is estimated to be as high as 1300.     

La（NCS）3.4.5H2O和B15C5在乙醇中的相平衡及热化学研究

采用半微量相平衡方法测定了三元体系Ｌａ（ＮＣＳ）３．４．５Ｈ２Ｏ－Ｂ１５Ｃ５－Ｃ２Ｈ５ＯＨ在２９８．１５Ｋ的溶解度，测定了各饱和溶液的折光率。     

Studies on the Structure and Properties of Cordierite Synthesized by Talc-Magnesite

Homogeneous cordierite has been synthesized at low cost by talc-magnesite and coal gangue as the main raw materials. The mechanism of synthesizing cordierite under such a com- posing system of raw materials, and the effect of temperature on the crystal cell parameters and microstructure and thermal expansion coefficient of cordierite crystal have been studied via testing methods of XRD, SEM, etc. The result shows that the homogeneous cordierite can be synthesized by the systematic composing materials of “talc-magnesite—coal gangue—talc” with heat pre- servation at 1350 ℃ for 1 h; as the keeping time is prolonged, Al3+ and Mg2+ in cordierite crystal are replaced by a few impurity ions such as Fe3+, Fe2+, etc., and the crystal cell parameters of cordierite present an increase trend; as the high-temperature heat preservation is prolonged, the content of glassy phase in the sample is increased, its density is improved, and its thermal expansion coeffi- cient presents an increase trend.     

山楂叶中熊果酸提取工艺研究

以熊果酸的提取率为指标,采用单因素与正交实验相结合的方法对提取工艺进行了优化,得到最佳提取参数为:乙醇体积分数95%、提取温度85℃、提取时间110min、液固比5:1、提取次数3次。在该条件下,熊果酸提取率为93.47%。该工艺简单合理,为工业生产提供了理论参考。     

β晶型聚丙烯塑性形变过程中的形态变化

β晶型聚丙烯塑性形变过程中的形态变化沈静姝，任宏燕，况勋（中国科学院化学研究所高分子物理开放实验室，北京，１０００８０）史观一（中国科学院上海有机所，上海，２０００３２）关键词β晶型聚丙烯，塑性形变，形态全同立构聚丙烯的分子链都是３；螺旋链，但其晶体...